Singer 9985 User Manual

46
B. REVERSE STITCHING
Reverse stitching is used for reinforcing the
ends of the seams.
1. Place the fabric in position where back stitching
is to be made and lower the presser foot.
2. Press and hold the reverse button.
Sew 4-5 reverse stitch.
3. Release the reverse button and press the start/
stop button (or press the pedal). Machine will
change to forward sewing.
4. When you reach the end of seam, press and
hold reverse button and sew 4-5 reverse
stitches.
Note:
Stitch patterns No. 3 and No. 4 have a built-in
reverse stitch. See page 50 for information on how
to sew these stitches.
C. AUTO TACK STITCH
You may sew tack stitches at the beginning and
end of the stitch.
This function can be used with all utility
patterns.
1. Touch the tack button.
Button will be highlighted.
2. Start to sew.
Machine will sew tacking stitches automatically
and then start to sew the selected pattern.
3. When you reach the end of seam, press the
reverse button once.
Machine will sew tacking stitches and stop
automatically.
4. If you want to cancel this function, touch the
tack button again. Highlight will turn off.
b

Singer 9985 Specifications

General

Buttonhole Styles	13
Stitch Width	7 mm
Stitch Length	5 mm
Sewing Speed	850 Stitches Per Minute
Screen	LCD Touch Screen
Automatic Needle Threader	Yes
Drop Feed	Yes
Free Arm	Yes
Type	Computerized
Bobbin System	Top Drop-in
Speed Control	Yes
Start/Stop Button	Yes
Presser Feet	13
Weight	20 lbs
Included Accessories	needles, bobbins, seam ripper/lint brush, auxiliary spool pin, spool pin felt