12 – Preparations
English
12 – Preparations
English
Important! Make sure that the presser foot is raised and the
needle is in its highest position by turning the handwheel
toward you. This is very important to help ensure that the
machine is correctly threaded. Not doing so can result in poor
stitch quality when you start to sew.
1. Place the thread on the spool pin and t the appropriately
sized spool cap.
2. Pull the thread around the thread guide (A) from back to
front.
3. Continue bringing the thread down through the right
threading slot (B), around the U-turn, then back upwards
through the left threading slot.
4. Bring the thread from the right into the take-up lever (C)
and down in the left-hand threading slot and to the needle
thread guide (D).
5. Thread the needle from front to back.
Thread the Machine
Machine from above
Machine from front
A
B
C
D
To Next Page
Loading...
Need help?
General
