Singer M2100 User Manual

20
Removing the presser foot
Push the presser foot (e) to disengage from the cut-out (c). (1)
Attaching the presser foot
Install the pin (d) of the presser foot (e) into the cut-out (c) of
the presser foot holder. (2)
Removing and attaching the presser foot shank
Raise the presser bar (a) with the presser foot lifter.
Remove and attach the presser foot shank (b) as illustrated. (3)
Attaching the edge/ quilting guide
Attach the edge/quilting guide (f) in the slot as illustrated.
Adjust as needed for hems, pleats, quilting, etc. (4)
Attention:
Turn power switch to o󰀨 ("O") when carrying out any of the
above operations!
Changing the Presser Foot
e
c
b
a
c
d
e
b
a
f

Singer M2100 Specifications

General

Buttonhole Style	4-step
Presser Foot Lifter	Yes
Free Arm	Yes
Type	Mechanical
Stitch Width	5 mm
Bobbin Type	Front-loading
Buttonhole Styles	1
Built-in Needle Threader	No
Drop-in Bobbin	No
Maximum Stitch Length	4 mm
Stitch Applications	Stretch
Presser Feet Included	All-Purpose Foot, Buttonhole Foot, Zipper Foot
Weight	12.1 lbs (5.5 kg)