SkyTrac Systems Ltd.
Document Rev. 02.010 ISAT-100-OPD-SOI Page 4 of 26
Restricted Proprietary and Confidential Information
2.2.3 Satellite Transceiver
Operating frequency 1616 MHz to 1626.5 MHz
*Power consumption
Transmit (max) 7W
*The ISAT-100 is not classified as “Equipment known to have a high potential for interference” in accordance with FAA
Policy No.: ASW-2001-01 dated April 25, 2002. Separate FADEC testing is not required for this installation.
2.3 Emissions Compliance
Entity
Document Title Document Number
US FCC Title 47 Code of Federal Regulations Section 15.109
US FCC Title 47 Code of Federal Regulations 1997 Section 25.202
ETSI Satellite Earth Stations and Systems (SES);
Harmonized EN for EN 301 441
2.4 Audio Interface
The Audio Output can provide 100 mW into 600 or 300 ohm nominal. The Audio Output is
short circuit protected.
Nominal microphone input voltage is 0.050 Vrms to 1.4 Vrms. Microphone input impedance
is 1000 ohms and provides an optional microphone excitation voltage. Refer to installation
instructions for configuration options.
2.5 ISAT-100 Installation Kit
The Installation Kit provided for the ISAT-100 is P/N 010000-2. The parts contents of the
Installation Kit can be found in the ISAT-100 Installation Kit Bill of Materials (DOC0159). It
contains mating connector to the ISAT-100, necessary hardware to attach it and antenna
connectors for normal installation.
The document reference is online, please check the correspondence between the online documentation and the printed version.
To Next Page
Loading...
Need help?
General