SkyTrac Systems Ltd.
Document Rev. 02.010 ISAT-100-OPD-SOI iii
Restricted Proprietary and Confidential Information
Document Revision History Continued
Rev ECO
Page Description Date Approval
- S 1.4, Pg
6, S 2.3,
2.4, Pg 7,
S 4.5, Pg
10, S 4.7,
Pg 18
Change discussion from two
separate antennae to one
combination antenna
Apr 13, 2004 KWallace
- Fig 4-2,
Appendix
A REAR
Both modified to illustrate
connecting to one combination
antenna
Apr 13, 2004 KWallace
- Pg 8 * * FAA Policy # 2001-01
Separate FADEC not required
June 1, 2004 KWallace
01.40
019 S 4.6.1,
Pg 14
Amendment to Data Connector
Diagram and Pin Description
Aug 19, 2004 KWallace
- Table 4.1,
Pg 16
Specified Pin J as Mission Switch Aug 19, 2004 KWallace
- S 4.6.1
Fig 4.3
Updated Connector Diagram
according to Table 4.1
Dec 16, 2004 KWallace
- S 4.8
Fig 4.5
Updated Connector Pinout Jan 5, 2005 KWallace
- S 4.6
Fig 4-2,
S 4.6.1
Fig 4-4,
Table 4-2
Updated 10-Pin Connector Pinout &
Description Table
Jan 20, 2005 KWallace
01.41
- Updated Document Formatting Feb 1, 2005 KWallace
01.42
022 ISAT Rev 01.80 Release Feb 15, 2005 G. Pringle
01.43
026 Pg 1. Pg
6, Pg 14,
Added instructions for identifying
the ISAT hardware version..
Apr 27, 2005 G.Pringle
01.44
- Pg 8, Added GPS not for navigational
purposes notice.
01.45
- P12 Remove reference to non existing
section.
01.46
- Pg 13 Added installation requirement that
system connectors must be
connected before system power is
applied. Added instructions for
determining which Mod the ISAT is.
The document reference is online, please check the correspondence between the online documentation and the printed version.
To Next Page
Loading...
Need help?
General