6-1
C
HAPTER
6
C
ONFIGURING
P
RINTER
S
ERVICES
If you want to use the print server built into the Barricade, then you
must first install the Port Monitor program as described in the
following section for Windows 95/98/ME/NT/2000.
To configure the Barricade Print Server for Windows 95/98/ME/
NT/2000, or Unix, see “Configure the Print Server” on page 6-4.
Install the Printer Port Monitor
Skip this section if you are using Unix.
For Windows 95/98/ME/NT/2000 clients, you need to install the
port monitor program as described in this section.
1. Insert the installation CD-ROM into your CD-ROM drive. Under
the PrintSvr directory, run the “setup.exe” program. The SMC
Port Monitor installation program advises you to close all other
Windows programs currently running on your computer. Click
“Next” to continue.
To Next Page
Loading...
Need help?
General
