SMC Networks LECP1 Series User Manual

- 50 -
10.2 Initial setting value of LEH series
Initial setting value of LEF series
Refer to the table below for the initial setting of Return to origin, jog and inching.
Common with LEHF series Common with LEH(S, Z)
series
Direction Side to be closed (Clamped side)
speed [mm/s] 10
Return to
origin
acceleration [mm/s
2
] 2000
speed [mm/s] 10
Jog
acceleration [mm/s
2
] 1000
Inching Distnace[mm] 5 1
Refer to the table below for the set value for 3 levels of pushing force of LEHF series. Pushing force is
fixed to 5mm/s.
LEHF10 LEHF20 LEHF32 LEHF40
Low 3 11 48 72
Middle 5 19.5 84 126
Pushing force [N]
High 7 28 120 180
*Pushing force accuracy--> LEHS10:±30%F.S., LEHS20:±25%F.S., LEHS32,40: ±20%F.S. Refer
to the operation manual of the actuator for details.
Refer to the table below for the set value for 3 levels of pushing force of the LEHZ series. Pushing
speed is fixed to 5mm/s.
LEHS10 LEHS20
Basic Compact Basic Compact
LEHS
32
LEHS
40
Low 2.2 1.4 9 7 36 52
Middle 3.9 2.5 15.5 12 63 91
Pushing force [N]
High 5.5 3.5 22 17 90 130
*Pushing force accuracy--> LEHS10:±30%F.S., LEHS20:±25%F.S., LEHS32,40: ±20%F.S. Refer
to the operation manual of the actuator for details.
Refer to the table below for the set value for 3 levels of pushing force of the LEHZ series. Pushing
speed is fixed to 5mm/s.
LEHZ10 LEHZ16
LEHZ20、25
Basic
Compact
Basic Compact Basic Compact
LEHZ
32
LEHZ
40
Low
6 2(3) 6 3(4) 16 11
52 84
Middle
10 4 10 5.5 28 19.5
91 147
Pushing
force [N]
High
14 6 14 8 40 28
130 210
*Pushing force accuracy--> LEHZ10, 16:±30%F.S., LEHZ20, 25:±25%F.S., LEHZ32,40: ±20%F.S.
Refer to the operation manual of the actuator for details.
*The value in bracket ( ) indicates dust cover type (LEHZJ series). The value without ( ) is common
value.

SMC Networks LECP1 Series Specifications

General

Brand	SMC Networks
Model	LECP1 Series
Category	Controller
Language	English