SMC Networks LECP1 Series User Manual

- 53 -
10.3 Initial setting value of LES series
Initial setting value of LES series
Refer to the table below for initial setting of Return to origin, jog and inching.
Common for all series of LES
Direction Side to be retracted
speed [mm/s] 20
Return to origin
acceleration [mm/s
2
] 100
speed [mm/s] 20
Jog
acceleration [mm/s
2
] 500
Inching Distance[mm] 1
Refer to the table below for the set value for 3 levels of pushing force. Pushing speed is fixed to
20mm/s for LESH□□, 10mm/s for LESH□□
LESH8R LESH16R LESH25R
J K J K J K
Low 4 6 15 23.5 43 77
Middle 7 10.5 25 39 71.5 128.5
Pushing
force [N]
High 10 15 35 55 100 180
*Pushing force accuracy is ±20%F.S. Refer to the operation manual of the actuator for details.
Refer to the table below for the speed and the acceleration table of the LES series.
LESH8,16RJ LESH8,16RK LESH25RJ LESH25RK
speed
[mm/s]
acceleration
[mm/s
2
]
speed
[mm/s]
acceleration
[mm/s
2
]
speed
[mm/s]
acceleration
[mm/s
2
]
speed
[mm/s]
acceleration
[mm/s
2
]
0 20 300 10 300 20 300 10 300
1 25 400 13 400 25 400 15 400
2 30 500 15 500 30 500 20 500
3 40 600 20 600 40 600 30 600
4 50 700 25 700 50 700 40 700
5 60 800 30 800 60 800 50 800
6 70 900 35 900 70 900 60 900
7 80 1000 40 1000 80 1000 70 1000
8 90 1500 45 1500 90 1500 80 1500
9 100 2000 50 2000 100 2000 90 2000
10 150 2500 75 2500 150 2500 100 2500
11 200 3000 100 3000 200 3000 110 3000
12 250 3500 125 3500 250 3500 120 3500
13 300 4000 150 4000 300 4000 130 4000
14 350 4500 175 4500 350 4500 140 4500
15 400 5000 200 5000 400 5000 150 5000

SMC Networks LECP1 Series Specifications

General

Brand	SMC Networks
Model	LECP1 Series
Category	Controller
Language	English