SMC Networks LEFS25 User Manual

- 31 -
3.4 Parameter setting method
Initial setting for the basic parameters
Refer to the controller’s (LEC series) operation manual for detail.
As the “basic parameter” is unique data of each actuator, if an actuator other than the “electric actuator /
slider type” is used, refer to the operation manual of each actuator and the controller’s (LEC series)
operation manual for the basic parameter.
Note1) Become effective after restarting the controller.
Note 2) Set the stroke setting value which has the additional distance. When inputting the product stroke,
the "stroke limit”alarm may be generated. (Code 1-052). （Stroke + 2mm as recommended）
Note 3) The initial input value is when the origin direction is “CCW”. When the origin direction set to “CW”,
input "2" to the “stroke(+)" and input “-(stroke)-2” to the “stroke(-)”.
Note 4) The origin offset is used for the “return to origin”. / See <Origin offset> on P.31.
Description(Extract)
Initial input value
Input range
Controller ID
1
1 to 64 note1)
IO pattern
1: 64
-
Acceleration /
deceleration pattern
1: Trapezoid - motion
-
S-motion ratio
0
-
Stroke (+), note 2), 3)
Stroke + 2
10000
Stroke (-), note 2), 3)
-2
-10000
Maximum speed
Max. speed of each
product
Step data input limit:
Max. speed of each product
Maximum acceleration /
deceleration
3000
to 3000
Default In positioning
LEFS: 0.5
LEFB: 1
LEFS: 0.5 to product stroke
LEFB: 1 to product stroke
Origin offset note4)
0.00
Origin direction: CCW:
-10000 + ”product stroke” to 9999
Origin direction: CW
-9999 to +10000 - ”product stroke”
Maximum pushing
force
-
-
Parameter protect
1: Common + StepData
Changeable parameter
1: Common + StepData, 2: Common
Enable switch
2: Disable
Select 1: Enable or 2: Disable when using a teaching box
Model name
Part no. of each product
Only the English characters and numbers are
changeable.
W-area output end 1
0.00
-
W-area output end 2
0.00
-
Origin correction data
0.00
-
2021-05-2010:32
DW913599

SMC Networks LEFS25 Specifications

General

Brand	SMC Networks
Model	LEFS25
Category	Controller
Language	English