SMC Networks LEFS25 User Manual

- 33 -
＜Origin offset＞
The origin offset means the value of the origin. (“Origin offset”=The display value of origin)
When the parameter “Origin offset” is changed, the value of “Stroke(+)”, “Stroke(-)” of basic parameter
should be checked again.
When the parameter “Origin offset” is changed, the display value of origin is changed. The step data should
be checked again.
Please refer to basic parameter on page 25 for changing of “Origin offset”.
Initial input value: “Origin offset”=0. Move in the opposite direction ( Moving distance 2mm / Not changeable )
by the return to origin becomes "origin =0".
a) In case of Origin direction: CCW
Example) Actuator stroke 50mm
“Origin offset”＝0 (Initial input value)
Changed to “Origin offset”＝10
b) In case of Origin direction: CW
Example) Actuator stroke 50mm
“Origin offset”＝0 (Initial input value)
Changed to “Origin offset”＝10
Changed to “Origin offset”＝-10
←CCW
CW→
0 10 20 30 40 50
stroke[mm]
50mm
Origin
←CCW
CW→
10 20 30 40 50 60
stroke[mm]
50mm
Origin
-40 -30 -20 -10 0 10
stroke[mm]
50mm
←CCW
CW→
Origin
-60 -50 -40 -30 -20 -10
stroke[mm]
50mm
←CCW
CW→
Origin
50mm
←CCW
CW→
-50 -40 -30 -20 -10 0
stroke[mm]
Origin
2021-05-2010:32
DW913599

SMC Networks LEFS25 Specifications

General

Brand	SMC Networks
Model	LEFS25
Category	Controller
Language	English