SMC Networks ZSE30A(F) User Manual

-35-
No.PS##-OML0003-B
■[F 7] Setting of power saving mode
Power saving mode is selectable.
When the Pressure switch is left for 30 seconds without any operation, it is shifted to power saving mode.
<Operation>
Press the
or button in function selection mode to display [F 7].
Press the button. Move on to setting of power saving mode.
Press the button to set. Return to function selection mode.
Setting of [F 7] power saving mode completed
In power saving mode, key operation holds normal display shown, and if there is no key operation for
30 seconds, the display enters power saving mode returns. (only measurement mode)
On the display in power saving mode, only decimal
points and indication lights flash. (The indication lights
flash only when the switch is turned on.)
∗: The operation indication light blinking at switch ON state, but it does not synchronized with output.
Setting of power saving mode
Press the
or
button to select power saving
mode.

SMC Networks ZSE30A(F) Specifications

General

Brand	SMC Networks
Model	ZSE30A(F)
Category	Measuring Instruments
Language	English