SMC Networks ZSE30A(F) User Manual

-37-
No.PS##-OML0003-B
■Special function setting
■[F90] Setting of all functions
All functions can be set in series.
This function is equipped with existing models as well.
<Operation>
Press the
or button in function selection mode to display [F90].
Press the button. Move on to setting of all functions.
[on] (used) selected
Setting of each function
∗
1
[oFF] (unused)
selected.
Press the
button
to set.
Return to function
selection mode.
After the change to [oFF] (unused),
press the button to set.
Return to function selection mode.
Press the
button for 2
seconds or longer.
[F90] setting of all functions completed Measurement mode
∗1: Setting of functions
Every time
button is pressed, function turns to page 38.
Set by
or button.
Refer each paragraph for the detail of setting.
Setting of all functions
Press the
or
button to select all functions.

SMC Networks ZSE30A(F) Specifications

General

Brand	SMC Networks
Model	ZSE30A(F)
Category	Measuring Instruments
Language	English