EasyManuals Logo
Home>SMC Networks>Switch>ZSE40A

SMC Networks ZSE40A User Manual

SMC Networks ZSE40A
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #64 background imageLoading...
Page #64 background image
-63-
No.PS※※-OMM0007-H
Specifications (products with M8 (3 pin) connector)
Model No.
ZSE40A
(vacuum)
ISE40A
(positive pressure)
Rated pressure range
0 to -101.3 kPa
-0.100 to 1.000 MPa
Set pressure range
10.0 to -105.0 kPa
-0.105 to 1.050 MPa
Withstand pressure
500 kPa
1.5 MPa
Minimum display unit
0.1 kPa
0.001 MPa
Applicable fluid
Air, inert gases and incombustible gases
Power supply voltage
12 to 24 VDC ±10%, ripple (p-p) 10% or less (protected against reverse
connection)
Current consumption
45 mA or less
Switch output
NPN or PNP open collector 1 output
Max. load current
80 mA
Max. applied voltage
28 V (NPN output)
Residual voltage
1 V or less (at 80 mA load current)
Response time
2.5 ms or less
(with anti-chatter function: 20, 100, 500, 1000 or 2000 ms)
Short circuit protection
Provided
Repeatability
±0.2%F.S. ±1 digit
Hys
teresis
Hysteresis mode
0 to variable
1
Window comparator mode
Display
3 1/2digits, 7-segment, dual-colour display (red/green)
Display accuracy
±2% F.S. ±1 digit (at ambient temperature 25±3 C)
Indicator LED
LED is ON when output is ON OUT: Orange
Environ
ment
Enclosure
IP65
Operating temperature range
Operation: -5 to 50 C, Storage: -10 to 60 C (no condensation or freezing)
Operating humidity range
Operation, Storage: 35 to 85% RH (no condensation)
Withstand voltage
1000 VAC, 1 minute between terminals and housing
Insulation resistance
50 M or more at 500 VDC between terminals and housing
UL Temperature rating
Surrounding air temperature rating: Maximum 50
o
C
Temperature characteristics
±2% F.S. (25 C reference)
Standard
CE, UL/CSA, RoHS
1: If the applied voltage fluctuates around the set value, the hysteresis must be set to more than the fluctuation width. Otherwise,
chattering will occur.
Piping specifications
Model No.
01
N01
Port size
R1/8
(with M5 female thread)
NPT1/8
(with M5 female thread)
Material of
wetted parts
Pressure sensing part
Silicone
Piping port
C3602 (electroless nickel plating)
O-ring: HNBR
Weight
45 g
46 g

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SMC Networks ZSE40A and is the answer not in the manual?

SMC Networks ZSE40A Specifications

General IconGeneral
BrandSMC Networks
ModelZSE40A
CategorySwitch
LanguageEnglish

Related product manuals