Product description
In the “System Control” menu navigate to the “Settings” menu
item and select it by pressing
T. The “Settings” menu is
displayed.
In the “Settings” menu navigate to the “Software” menu item
and select it by pressing
T. The “Software Settings” dialog
is displayed (see Fig. 39).
The “Software Settings” dialog provides you with the following in-
formation:
Item Description
Software Revision Software Revision installed on the local ma-
chine
Model Type Model type of eqo
Gender Mode For privacy reasons the gender mode of eqo
can be configured as:
Genderless: There is no differentiation
between male and female persons to be
scanned. Gender of the remote operator
is unimportant.
Male/Female: A differentiation is made
between male and female persons to be
scanned. Minimum two remote operators
must be connected to the local station
with different gender.
Face Detection eqo can be configured with an option to blur
the facial features of scanned persons. This
field informs if this option is turned on or off.
I/O Board Firmware
Revision
Firmware revision of the I/O Board
Important!
Move between adjacent items in screen menus or win-
dows by directing the navigator up or down.
If you direct the navigator to the right or to the left, you
change the entries or call up a selected menu item or
function.
Make the desired modifications and press
T to apply the
changes and exit or
U to discard your changes.
95591706 11/02/2010 © smiths detection proprietary information
Fig. 39: “Software Settings” dialog
31
To Next Page
Loading...
Need help?
General