Start up
Important!
Prior to using the audio hardware, read the annexed
documentation ”Plantronics Savi Office W0100 – Profes-
sional Wireless Headset System (W01 Base + WH100
Headset) with Optional HL10 Lifter – User Guide“!
Subscribing a master headset to the local station audio base sta-
tion
The primary local operator subscribes his headset as master. Oth-
er operators are linked in via a conferencing facility ( 45, Confer-
ence in additional headsets). This local wireless link is independent
of eqo and remains in place until terminated by one of the operat-
ors.
Step 1:
Double press the subscribe button on the base.
The subscribe indicator will flash red and green.
Step 2:
Press the call control button (volume up button) on the headset
up for three seconds. When the subscribe indicator turns
solid green at the base, the subscription process is completed.
Important!
If the subscription process times out after two minutes
or if the subscription process fails, the subscription light
will become solid red for four seconds and then return
to its previous state. If this occurs, try to re-subscribe
the headset again.
Conference in additional headsets
Up to four headsets can be subscribed to the wireless audio base
for conferencing. Follow the following steps to conference in a
headset.
Step 1:
Place the headset into over-the-air subscription mode by push-
ing the headset call control button (volume up button) up for
three seconds.
The indicator light of the headset becomes solid green.
95591706 11/02/2010 © smiths detection proprietary information
45
Fig. 65: Wireless audio base at the local station
Fig. 67: Headset
Fig. 66: Headset
To Next Page
Loading...
Need help?
General