Help Guide
Interchangeable Lens Digital Camera
ILCE-6100 α6100
Bright Monitoring
Allows you to adjust the composition when shooting in dark environments. By extending the exposure time, you can
check the composition on the viewfinder/monitor even in dark locations such as under the night sky.
Note
During [Bright Monitoring], [Live View Display] will automatically switch to [Setting Effect OFF], and setting values such as
exposure compensation will not be reflected in the live view display. It is recommended that you use [Bright Monitoring] only in
dark locations.
[Bright Monitoring] will be automatically cancelled in the following situations.
When the camera is turned off.
When the shooting mode is changed from P/A/S/M to a mode that is not P/A/S/M.
When the focus mode is set to other than manual focus.
When [
MF Assist] is executed.
When [Focus Magnifier] is selected.
During [Bright Monitoring], the shutter speed may be slower than normal while shooting in dark locations. Also, because the
measured brightness range is expanded, the exposure may change.
Related Topic
Live View Display
5-009-879-11(1) Copyright 2019 Sony Corporation
MENU →
(Camera Settings2) → [ Custom Key] → assign the [Bright Monitoring] function to the
desired key.
1
Press the key to which you assigned the [Bright Monitoring] function, then shoot an image.
The brightness due to [Bright Monitoring] will continue after shooting.
To return the monitor brightness to normal, press the key to which you assigned the [Bright Monitoring] function
once again.
2
To Next Page
Loading...
Need help?
General
