Sony a6600 User Manual

Help Guide
Interchangeable Lens Digital Camera
ILCE-6600 α6600
Viewing images on a TV using an HDMI cable
To view images stored on this product using a TV, an HDMI cable (sold separately) and an HD TV equipped with an
HDMI jack are required.
“BRAVIA” Sync
By connecting this product to a TV that supports “BRAVIA” Sync using an HDMI cable (sold separately), you can operate
this product's playback functions with the TV remote control.
If you connect this camera to a TV using an HDMI cable, available menu items are limited.
Turn off both this product and the TV.
1
Connect the HDMI micro terminal of this product to the HDMI jack of the TV using an HDMI cable (sold
separately).
2
Turn on the TV and switch the input.
3
Turn on this product.
Images shot with the product appear on the TV screen.
4
Select an image using the right/left sides of the control wheel.
The monitor of this camera is not lit up on the playback screen.
If the playback screen is not displayed, press the
(Playback) button.
5
After performing the steps above to connect this camera to a TV, select MENU →
(Setup) → [HDMI Settings] →
[CTRL FOR HDMI] → [On].
1.
Press the SYNC MENU button on the TV remote control, and select the desired mode.2.
270

Sony a6600 Specifications

General

Sensor Type	APS-C CMOS
Effective Pixels	24.2MP
Image Stabilization	5-axis in-body image stabilization
Continuous Shooting Speed	11 fps
Connectivity	Wi-Fi, Bluetooth, NFC
Dimensions	120.0 x 66.9 x 69.3 mm
Autofocus Points	425
Video Recording	4K at 30p
Viewfinder	2.36 million-dot OLED electronic viewfinder
Screen	3.0-inch tilting touchscreen, 921, 600 dots
Battery Life	Approx. 810 shots (CIPA)
Battery	NP-FZ100
Weight	503 g (with battery and memory card)
Memory Card Slot	SD/SDHC/SDXC (UHS-I compatible)
ISO Range	100-32000 (expandable to 50-102400)