Sony a6600 User Manual

Help Guide
Interchangeable Lens Digital Camera
ILCE-6600 α6600
Connecting to a computer
Note
Do not turn on/off or restart the computer, or wake the computer from sleep mode when a USB connection has been established
between the computer and the camera. Doing so may cause a malfunction. Before turning on/off or restarting the computer, or
waking the computer from sleep mode, disconnect the camera from the computer.
Related Topic
USB Connection
USB LUN Setting
5-009-967-11(1) Copyright 2019 Sony Corporation
Insert a sufficiently charged battery pack into the camera.
1
Turn on the camera and the computer.
2
Check that [USB Connection] under
(Setup) is set to [Mass Storage].
3
Connect the camera to the computer using the micro USB cable (supplied) (A).
When you connect the camera to the computer for the first time, the procedure for recognizing the camera may
start automatically on the computer. Wait until the procedure is finished.
If you connect the product to your computer using the micro USB cable when [USB Power Supply] is set to
[On], power is supplied from your computer. (Default setting: [On])
4
363

Sony a6600 Specifications

General

Sensor Type	APS-C CMOS
Effective Pixels	24.2MP
Image Stabilization	5-axis in-body image stabilization
Continuous Shooting Speed	11 fps
Connectivity	Wi-Fi, Bluetooth, NFC
Dimensions	120.0 x 66.9 x 69.3 mm
Autofocus Points	425
Video Recording	4K at 30p
Viewfinder	2.36 million-dot OLED electronic viewfinder
Screen	3.0-inch tilting touchscreen, 921, 600 dots
Battery Life	Approx. 810 shots (CIPA)
Battery	NP-FZ100
Weight	503 g (with battery and memory card)
Memory Card Slot	SD/SDHC/SDXC (UHS-I compatible)
ISO Range	100-32000 (expandable to 50-102400)