Sony a6600 User Manual

Help Guide
Interchangeable Lens Digital Camera
ILCE-6600 α6600
Wi-Fi Settings: WPS Push
If your access point has a Wi-Fi Protected Setup (WPS) button, you can register the access point to this product easily.
Note
[WPS Push] works only if the security setting of your access point is set to WPA or WPA2 and your access point supports the Wi-
Fi Protected Setup (WPS) button method. If the security setting is set to WEP or your access point does not support the Wi-Fi
Protected Setup (WPS) button method, perform [Access Point Set.].
For details about the available functions and settings of your access point, see the access point operating instructions or contact
the administrator of the access point.
A connection may not be possible or the communication distance may be shorter depending on the surrounding conditions, such
as the type of wall material and the presence of obstructions or radio waves between the product and access point. In this case,
change the location of the product or move the product closer to the access point.
Related Topic
Wi-Fi Settings: Access Point Set.
5-009-967-11(1) Copyright 2019 Sony Corporation
MENU →
(Network) →[Wi-Fi Settings] → [WPS Push].
1
Push the Wi-Fi Protected Setup (WPS) button on the access point to connect.
2
352

Sony a6600 Specifications

General

Sensor Type	APS-C CMOS
Effective Pixels	24.2MP
Image Stabilization	5-axis in-body image stabilization
Continuous Shooting Speed	11 fps
Connectivity	Wi-Fi, Bluetooth, NFC
Dimensions	120.0 x 66.9 x 69.3 mm
Autofocus Points	425
Video Recording	4K at 30p
Viewfinder	2.36 million-dot OLED electronic viewfinder
Screen	3.0-inch tilting touchscreen, 921, 600 dots
Battery Life	Approx. 810 shots (CIPA)
Battery	NP-FZ100
Weight	503 g (with battery and memory card)
Memory Card Slot	SD/SDHC/SDXC (UHS-I compatible)
ISO Range	100-32000 (expandable to 50-102400)