Sony a6600 User Manual

Help Guide
Interchangeable Lens Digital Camera
ILCE-6600 α6600
Wi-Fi Settings: Access Point Set.
You can register your access point manually. Before starting the procedure, check the SSID name of the access point,
security system, and password. The password may be preset in some devices. For details, see the access point
operating instructions, or consult the access point administrator.
Other setting items
Depending on the status or the setting method of your access point, you may want to set more items.
WPS PIN:
Displays the PIN code you enter into the connected device.
Priority Connection:
Select [On] or [Off].
IP Address Setting:
MENU →
(Network) → [Wi-Fi Settings] → [Access Point Set.].
1
Select the access point you want to register.
When the desired access point is displayed on the screen: Select the desired access point.
When the desired access point is not displayed on the screen: Select [Manual Setting] and set the access
point.
If you select [Manual Setting], input the SSID name of the access point, then select the security system.
2
Input the password, and select [OK].
Access points without the mark do not require a password.
3
Select [OK].
4
353

Sony a6600 Specifications

General

Sensor Type	APS-C CMOS
Effective Pixels	24.2MP
Image Stabilization	5-axis in-body image stabilization
Continuous Shooting Speed	11 fps
Connectivity	Wi-Fi, Bluetooth, NFC
Dimensions	120.0 x 66.9 x 69.3 mm
Autofocus Points	425
Video Recording	4K at 30p
Viewfinder	2.36 million-dot OLED electronic viewfinder
Screen	3.0-inch tilting touchscreen, 921, 600 dots
Battery Life	Approx. 810 shots (CIPA)
Battery	NP-FZ100
Weight	503 g (with battery and memory card)
Memory Card Slot	SD/SDHC/SDXC (UHS-I compatible)
ISO Range	100-32000 (expandable to 50-102400)