Help Guide
Interchangeable Lens Digital Camera
ILCE-7C α7C
Exposure Std. Adjust
Adjusts this camera's standard for the correct exposure value for each metering mode.
Metering Mode
The set standard value will be applied when you select the corresponding metering mode in MENU →
(Camera
Settings1) → [Metering Mode].
Multi/ Center/ Spot/ Entire Screen Average/ Highlight
Note
The exposure compensation will not be affected when [Exposure Std. Adjust] is changed.
The exposure value will be locked according to the value set for [
Spot] during using spot AEL.
The standard value for M.M (Metered Manual) will be changed according to the value set in [Exposure Std. Adjust].
The value set in [Exposure Std. Adjust] is recorded in Exif data separately from the exposure compensation value. The amount of
exposure standard value will not be added to the exposure compensation value.
If you set [Exposure Std. Adjust] during bracketing shooting, the number of shots for the bracketing will be reset.
Related Topic
Metering Mode
5-021-699-11(1) Copyright 2020 Sony Corporation
MENU →
(Camera Settings1) → [Exposure Std. Adjust] → desired metering mode.
1
Select the desired value as the metering standard.
You can set a value from -1 EV to +1 EV in 1/6 EV increments.
2
To Next Page
Loading...
Need help?
General
