Sony A7C User Manual

Help Guide
Interchangeable Lens Digital Camera
ILCE-7C α7C
Connecting to a computer
Note
Do not turn on/off or restart the computer, or wake the computer from sleep mode when a USB connection has been established
between the computer and the camera. Doing so may cause a malfunction. Before turning on/off or restarting the computer, or
waking the computer from sleep mode, disconnect the camera from the computer.
Related Topic
Side view
USB Connection
USB LUN Setting
5-021-699-11(1) Copyright 2020 Sony Corporation
Insert a sufficiently charged battery pack into the camera.
1
Turn on the camera and the computer.
2
Check that [USB Connection] under
(Setup) is set to [Mass Storage].
3
Connect the camera to the computer using the USB cable (supplied).
Connect the USB cable to the USB Type-C terminal on the camera.
When you connect the camera to the computer for the first time, the procedure for recognizing the camera may
start automatically on the computer. Wait until the procedure is finished.
If you connect the product to your computer using the USB cable when [USB Power Supply] is set to [On],
power is supplied from your computer. (Default setting: [On])
Use the USB Type-C cable (supplied) or a USB-standard cable.
Use a USB 3.2-compatible computer and the USB Type-C cable (supplied) for higher-speed communications.
4
379

Sony A7C Specifications

General

Effective Megapixels	24.2 MP
ISO Sensitivity	100-51200 (expandable to 50-204800)
Weight	509 g (with battery and memory card)
Wireless Connectivity	Wi-Fi, Bluetooth
Sensor Type	Full-Frame Exmor R CMOS
Autofocus Points	693 phase-detection points / 425 contrast-detection points
Image Stabilization	5-axis image stabilization
Viewfinder Type	0.39-inch type electronic viewfinder
LCD Screen	3.0-inch type, 921, 600 dots touch screen
Video Resolution	4K (3840x2160)
Battery Life	Approx. 740 shots (LCD)
Continuous Shooting	10 fps
Dimensions	124.0 x 71.1 x 59.7 mm
Memory Card Slot	Single SD/SDHC/SDXC (UHS-II compatible)