20
Your camcorder automatically focuses for you.
(1) Remove the lens cap by pressing both knobs on its sides and attach the lens
cap to the grip strap.
(2) Install the power source and insert a cassette. See “Step 1” to “Step 3” for more
information (p. 11 to 19).
(3) Set the POWER switch to CAMERA while pressing the small green button.
Your camcorder is set to the standby mode.
(4) Open the LCD panel while pressing OPEN. The viewfinder automatically
turns off.
(5) Press START/STOP. Your camcorder starts recording. The REC indicator
appears. The camera recording lamp located on the front of your camcorder
lights up. To stop recording, press START/STOP again.
The recording lamp lights up in the viewfinder when you record with the
viewfinder.
— Recording – Basics —
Recording a picture
5
3
1
2
40min
REC
0:00:01
PLAYER
POWER
OFF
CAMERA
(
CHARGE
)
PLAYER
POWER
OFF
CAMERA
(
CHARGE
)
4
Camera
recording
lamp
Microphone
To Next Page
Loading...
Need help?
General