28
Checking the recording – END SEARCH
You can use this button to record a picture from the last recorded scene successively.
You can go to the end of the recorded section after you record.
Press END SEARCH in CAMERA mode.
The last 5 seconds of the recorded section are played back and the playback stops. You
can monitor the sound from the speaker or the earphone.
Note
If you start recording after using the end search function, occasionally, the transition
between the last scene you recorded and the next scene may not be smooth.
Once you eject the cassette after you have recorded on the tape
The end search function does not work.
END
SEARCH
To Next Page
Loading...
Need help?
General