13
2 Inserting the battery pack/a “Memory Stick Duo” (not
supplied)
1Open the battery/“Memory Stick Duo” cover.
2Insert the “Memory Stick Duo” (not supplied) all the way in until it clicks.
3Insert the battery pack.
4Close the battery/“Memory Stick Duo” cover.
[ When there is no “Memory Stick Duo” inserted
The camera records/plays back images using the internal memory (approx. 31 MB).
[ To check the remaining battery time
Press POWER button to turn on and check the remaining battery on the LCD screen.
• It takes about one minute until the correct battery remaining indicator appears.
• The displayed battery remaining indicator may not be correct under certain circumstances.
• The Clock Set screen appears when the camera is turned on for the first time (page 15).
Insert the “Memory Stick
Duo” all the way in as
shown in the illustration
until it clicks.
Battery/“Memory Stick
Duo” cover
ɟ ɠ
Insert the battery pack while
pressing the battery eject
lever with the tip of the
battery pack.
Battery
remaining
indicator
Battery
remaining
guidelines
Sufficient
power
remaining
Battery
almost fully
charged
Battery half
full
Battery low,
recording/
playback
will stop
soon.
Change the battery
with fully charged
one, or charge the
battery. (The warning
indicator flashes.)
To Next Page
Loading...
Need help?
General
