30
Recording a still image on a tape – Tape Photo recording
Self-timer tape photo recording
– DCR-TRV320 only
You can record still images on tapes with the self-timer. This mode is useful when you
want to record yourself. You can also use the Remote Commander for this operation.
(1) In the standby mode, press (self-timer). The (self-timer) indicator
appears on the LCD screen or in the viewfinder.
(2) Press PHOTO firmly.
Self-timer starts counting down from 10 with a beep sound. In the last two
seconds of the countdown, the beep sound gets faster, then recording starts
automatically.
To cancel self-timer recording
Press (self-timer) so that the indicator disappears from the LCD or viewfinder
screen while your camcorder is in the standby mode. You cannot cancel self-timer
recording with the Remote Commander.
Note
The self-timer recording mode is automatically cancelled when:
– Self-timer recording is finished.
– The POWER switch is set to OFF (CHARGE) or VTR.
2
PHOTO
(self-timer)
1
PHOTO
To Next Page
Loading...
