91
“Memory Stick” operations
Viewing a still image
– Memory Photo playback
You can play back still images recorded on a “Memory Stick”. You can also play back 6
images at a time by selecting the index screen.
Before operation
Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to MEMORY or VTR. Make sure that the LOCK is set to
the right (unlock) position.
(2) Open the LCD panel while pressing OPEN.
(3) Press MEMORY PLAY. The last recorded image is displayed.
(4) Press MEMORY +/– to select the desired still image. To see the previous
image, press MEMORY –. To see the next image, press MEMORY +.
To stop memory photo playback
Press MEMORY PLAY.
To play back recorded images on a TV screen
•Connect your camcorder to the TV with the A/V connecting cable supplied with your
camcorder before the operation.
•When operating memory photo playback on a TV or the LCD screen, the image
quality may appear to have deteriorated. This is not a malfunction. The image data is
as good as ever.
•Turn the audio volume of the TV down before operation, or noise (howling) may be
output from the TV speakers.
If “ NO FILE” appears on the LCD screen or in the viewfinder
No image is recorded on the “Memory Stick.”
Image data modified with personal computers or shot with other equipment
You may not be able to play them back with your camcorder.
3
2
1
4
VTR
OFF
MEMORY
CAMERA
(
CHARGE
)
PLAY
To Next Page
Loading...
Need help?
General