94
Copying the image recorded on “Memory
Stick” to tapes
You can copy still images or titles recorded on “Memory Stick”s and record them to
Hi8 /Digital8 tapes.
Before operation
Insert a Hi8 /Digital8 tape for recording and a “Memory Stick” into your
camcorder.
(1) Set the POWER switch to VTR.
(2) Using the video control buttons, search a point where you want to record the
desired still image. Set the Hi8
/Digital8 tape to playback pause mode.
(3) Press z REC and the button on its right simultaneously on your camcorder.
The Hi8
/Digital8 tape is set to the recording pause mode.
(4) Press MEMORY PLAY to play back the still image you want to copy (p. 91).
(5) Press X to start recording and press X again to stop.
(6) If you have more to copy, repeat steps 4 and 5.
To stop copying in the middle
Press x.
5
4 1
PAUSE
3
2
PLAY
VTR
OFF
MEMORY
CAMERA
(
CHARGE
)
REC
To Next Page
Loading...
Need help?
General