Sony DCR-TRV900 User Manual

82
(not supplied)
Signal flow
Editing onto another tape
You can create your own video program by editing with any other DV, mini DV,
h 8 mm, H Hi8, j VHS, k S-VHS,  VHSC, K S-VHSC, l Betamax or
¬ ED Betamax VCR that has audio/video inputs. You can edit with little deterioration
of picture and sound quality when using the i.LINK cable (DV connecting cable).
Before editing
Connect the camcorder to the VCR using the supplied A/V connecting cable or the VMC-
IL4415/IL4435/2DV/4DV i.LINK cable (DV connecting cable) (not supplied).
Using the A/V connecting cable [a] or S video connecting cable
(not supplied) [b]
Set the input selector on the VCR to LINE.
Notes on editing when using the A/V connecting cable
•Press DATA CODE, SEARCH MODE on the Remote Commander, or DISPLAY to turn off
the display indicators. Otherwise, the indicators will be recorded on the tape.
•If your TV or VCR is a monaural type, connect the yellow plug of the A/V connecting
cable for video to the TV or VCR. Connect only the white or red plug for audio to the TV or
VCR. If you connect the white plug, the sound is L (left) signal. If you connect the red plug,
the sound is R (right) signal.
•You can edit precisely by connecting a LANC cable to this camcorder and other video
equipment having fine synchro-editing function, using this camcorder as a player.
TV
VCR
[b]
[a]
AUDIO IN
VIDEO IN
S VIDEO IN
S VIDEO
:
AUDIO/VIDEO

Sony DCR-TRV900 Specifications

General

Digital zoom	48 x
Optical zoom	12 x
Image stabilizer	Yes
Focal length range	4.3 - 51.6 mm
Sensor type	CMOS
Total megapixels	0.18 MP
Optical sensor size	1/4 \
Effective megapixels (movie)	0.38 MP
Video formats supported	DV
Minimum illumination	4 lx
Horizontal resolution	500 lines

Weight and Dimensions

Depth	103 mm
Width	193 mm
Height	93 mm
Weight	880 g