160
You can record moving pictures with sound on a “Memory Stick.”
You can record picture and sound continuously up to the capacity of a “Memory
Stick”(MPEG MOVIE EX).
Before operation
Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to MEMORY. Make sure that the LOCK switch is set to
the further side (unlock position).
(2) Press START/STOP. Your camcorder starts recording. The camera recording
lamp located on the front of your camcorder lights up. The picture and sound
are recorded up to the remaining capacity of the “Memory Stick.” For more
information about recording time, see page 143.
To stop recording
Press START/STOP.
[a]: Recording time can be recorded on the
“Memory Stick”.
[b]: This indicator is displayed for five seconds
after pressing START/STOP. This indicator
is not recorded.
Recording moving pictures on a “Memory
Stick” – MPEG movie recording
2
320
40min REC 0:00
:
03
15
min
BBB
FN
INDEXPLAY
POWER
OFF
(
CHG
)
CAMERA
MEMORY
VCR
[a]
[b]
To Next Page
Loading...
Need help?
General