187
“Memory Stick” Operations
You can specify a recorded still image to print out by writing a print mark. This
function is useful for printing out still images later.
Your camcorder conforms to the DPOF (Digital Print Order Format) standard for
specifying still images to print out.
Before operation
Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to MEMORY or VCR. Make sure that the LOCK switch
is set to the further side (unlock position).
(2) Press INDEX to display the index screen.
(3) Press
MARK, then press the image for which you want to write a print
mark. A “
” appears on the selected image.
To return to FN
Press EXIT.
To cancel writing print marks
Press the image for which you want to cancel the print mark set in step 3 again. The
disappears.
If the write-protect switch on the “Memory Stick” is set to LOCK
You cannot write print marks on still images.
Moving pictures
You cannot write print marks on moving pictures.
Writing a print mark – PRINT MARK
2
INDEX
3
MARK
MARK
456
123
EXIT
RET.
2 / 40
T t
456
123
EXIT
1 / 40
T t
DEL
MARK
-
MARK
To Next Page
Loading...
Need help?
General