167
“Memory Stick” Operations
You can duplicate selected scenes (programmes) for editing onto a “Memory Stick.”
Making the programme
Before operation
Insert a “Memory Stick” and a recorded tape into your camcorder.
(1) Set the POWER switch to VCR.
(2) Press MENU, then turn the SEL/PUSH EXEC dial to set VIDEO EDIT in
to MEMORY, then press the dial (p.223).
(3) Turn the SEL/PUSH EXEC dial to select IMAGESIZE and select the desired
image size, then press the dial.
(4) Search for the beginning of the first scene you want to insert using the video
operation buttons, then pause playback.
You can fine-adjust one frame at a time with EDITSEARCH.
(5) Press MARK on the Remote Commander, or turn the SEL/PUSH EXEC dial to
select MARK, then press the dial.
The IN point of the first programme is set, and the top part of the programme
mark changes to light blue.
(6) Search for the end of the first scene you want to insert using the video
operation buttons, then pause playback.
You can fine-adjust one frame at a time with EDITSEARCH.
(7) Press MARK on the Remote Commander, or the SEL/PUSH EXEC dial.
The OUT point of the first programme is set, then the bottom part of the
programme mark changes to light blue.
(8) Repeat steps 4 to 7, then set the programme.
When one programme is set, the programme mark changes to light blue.
You can set 20 programmes in maximum.
Recording edited pictures from a tape as
a moving picture – Digital program
editing (on a “Memory Stick”)
5
7
8
4,6
PAUSE
STOP
REW FFPLAY
320
320
320
VIDEO EDIT
MARK
UNDO
ERASE ALL
START
IMAGESIZE
1 OUT
00
:
08
:
55
:
06
TOTAL 0
:
00
:
00
SCENE 0 2min
TOTAL 0
:
00
:
12
SCENE 1 2min
TOTAL 0
:
00
:
31
SCENE 3 2min
[
MENU
]
:
END
VIDEO EDIT
MARK
UNDO
ERASE ALL
START
IMAGESIZE
2 IN
00
:
08
:
58
:
06
[
MENU
]
:
END
VIDEO EDIT
MARK
UNDO
ERASE ALL
START
IMAGESIZE
4 IN
00
:
10
:
01
:
23
[
MENU
]
:
END
N X
N X N X
MENU
To Next Page
Loading...
Need help?
General