Sony E-mount SEL200600G User Manual

5-41
SEL200600G
(8) ROM CHECK
• Check the data stored on the Main Board.
Subject Not required
Operation on Lens side Not required
Shooting Mode of the camera P mode (Program Auto)
Checking Method
1. Click the [ROM CHECK] button in the Adjustment and Inspec-
tion.
2. Data check is performed, and the check result is displayed in the
message area.
[].[].[].[]
Result of data check
(9) SLEEP
• Set the switch to initial position.
• Perform final check.
Subject Not required
Operation on Lens side
• Focus-mode switch
• Focus-range limiter
• SteadyShot switch
• SteadyShot mode switch
• Zooming ring
Shooting Mode of the camera P mode (Program Auto)
Checking Method
1. Set the switch position of the lens as follows.
• Focus-mode switch : AF
• Focus-range limiter : FULL
• SteadyShot switch : ON
• SteadyShot mode switch : MODE1
2. Click the [SLEEP] button in the Adjustment and Inspection.
3. “PLEASE CHANGE ZOOM TO WIDE” is displayed, set the
zooming ring to the WIDE end (focal length: 200 mm), press
the ENTER key.
Zooming ring
4. “SW POSITION CHECK OK” is displayed, press the ENTER
key.
5. Perform final check.
6. When the final check is completed, “ FINAL CHECK END.”
is displayed in the message area.
SYSSET
2019/06/2822:04:56(GMT+09:00)

Sony E-mount SEL200600G Specifications

General

Brand	Sony
Model	E-mount SEL200600G
Category	Camera Lens
Language	English