23
Recording/Playback
DCR-HC17E/HC19E/HC21E/HC22E 2-586-501-11(1)
• A mirror-image of the subject appears on the
LCD screen, but the picture will be normal
when recorded.
To use a tripod ........................
Attach the tripod (optional: the length of
the screw must be less than 5.5 mm (7/32
inches)) to the tripod receptacle using a
tripod screw.
Playback
To play back the images with added
special effects .........................
See [P EFFECT] on page 40.
Recording/Playback
To check the remaining battery
(Battery Info) ..........................
Set the POWER switch up to OFF (CHG),
then press DISP/BATT INFO . The
battery information appears for about 7
seconds. Keep the button pressed to view it
for about 20 seconds.
Remaining battery (approx.)
Recording capacity (approx.)
To turn off the operation confirmation
beep ....................................
See [BEEP] on page 46.
To initialize the settings .............
Press RESET to initialize all the
settings, including the setting of the date
and time.
Other part names and functions
Speaker
Sounds come out from the speaker.
•
For how to adjust the volume, see page 21.
REC lamp
The REC lamp lights up in red during
recording (p. 46).
Remote sensor (DCR-HC19E/HC21E/
HC22E)
Point the Remote Commander (p. 28)
towards the remote sensor to operate
your camcorder.
Internal stereo microphone
To Next Page
Need help?
General