Accessory shoe
• Remove the shoe cover when you use an
accessory.
• The accessory shoe has a safety device for
fixing the installed accessory securely. To
connect an accessory, press down and push
it to the end, and then tighten the screw. To
remove an accessory, loosen the screw, and
then press down and pull out the accessory.
(USB) jack (p. 53)
For DCR-HC17E/HC19E:
DV OUT Interface jack (p. 47, 60)
For DCR-HC21E/HC22E:
DV Interface jack (p. 47, 60)
A/V (audio/video) OUT jack (p. 30, 47)
LANC jack (blue)
• The LANC control jack is used for
controlling the tape transport of video
devices and peripherals connected to it.
For DCR-HC22E:
Interface connector
DC IN jack (p. 9)
(USB) ON/OFF switch
• Set this to ON to use the USB connection.
To Next Page
Loading...
Need help?
General