110
Recording an image from a mini DV tape as a still image
S VIDEO LANC
DV
DV IN/OUT
DV OUT
: Signal flow
Recording a still image from other equipment
(1) Set the POWER switch to VCR and set DISPLAY in to LCD in the menu
settings.
(2) Play back the recorded tape, or turn the TV on to see the desired program.
The image of the other equipment is displayed on the LCD screen or in the
viewfinder.
(3) Follow steps 3 and 4 on page 108.
Using the A/V connecting cable
S VIDEO
VIDEO
OUT
S VIDEO
AUDIO/VIDEO
Connect the yellow plug of the A/V connecting cable to the video jack on the VCR or
the TV.
If your TV or VCR has an S video jack
Connect using an S video cable (not supplied) to obtain high-quality pictures.
With this connection, you do not need to connect the yellow (video) plug of the A/V
connecting cable.
Connect an S video cable (not supplied) to the S video jacks of both your camcorder and
the TV or VCR.
This connection produces higher quality DV format pictures.
Using the i.LINK cable (DV connecting cable)
: Signal flow
(not supplied)
To Next Page
Loading...
Need help?
General