Quick Start Guide
6
Quick Start Guide
Inserting a cassette (p. 14)
Connecting the power cord (p. 13)
Use the battery pack when using your camcorder outdoors (p. 10).
This chapter introduces you to the basic features
of your camcorder. See the page in parentheses
“( )” for more information.
Pull down the Holding Grip to hold your
camcorder as illustrated.
Open the DC IN jack
cover.
1Slide OPEN/Z
EJECT in the
direction of the
arrow and open the
lid.
2Push the middle
portion of the back
of the cassette to
insert. Insert the
cassette in a straight
line deeply into the
cassette
compartment with
the window facing
out.
3Close the cassette
compartment by
pressing the
mark on the cassette
compartment.
After the cassette
compartment goes
down completely,
close the lid until it
clicks.
Holding Grip
Connect the plug with its v
mark facing up.
AC power adaptor
(supplied)
To Next Page
Loading...
Need help?
General