92
2
4
1,7
3
6
MENU
MANUA L SET
PROGRAM AE
PEFFECT
W
HT BAL
AUTOSHTR
[
MENU
]
:
END
SETUP MENU
CLOCK SET
AUTO TV ON
JAN
1 2000
12:00:00
AM
TV I NPUT
LTR SI ZE
DEMO MODE
RETURN
[
MENU
]
:
END
SETUP MENU
CLOCK SET
AUTO TV ON
JAN
12000
TV I NPUT
LTR SI ZE
DEMO MODE
12 00
AM
RETURN
[
MENU
]
:
END
SETUP MENU
CLOCK SET
AUTO TV ON
JUL
42000
TV I NPUT
LTR SI ZE
DEMO MODE
530
PM
RETURN
[
MENU
]
:
END
SETUP MENU
CLOCK SET
AUTO TV ON
JUL
4 2000
5:30:00
PM
TV I NPUT
LTR SI ZE
DEMO MODE
RETURN
[
MENU
]
:
END
JAN
12000
12 00
AM
JAN
12000
12 00
AM
The year changes as follows:
If you do not set the date and time
“– –:– –:– –” is recorded on the data code of the tape and the “Memory Stick.”
Note on the time indicator
The internal clock of your camcorder operates on a 12-hour cycle.
•12:00 AM stands for midnight.
•12:00 PM stands for noon.
The default clock setting is set to Tokyo time for the models sold in Japan, and New
York time for other models.
If you do not use your camcorder for about 3 months, the date and time settings may be
released (bars may appear) because the manganese-lithium battery installed in your
camcorder will have been discharged (p. 153).
First, set the year, then the month, the day, the hour and then the minute.
(1) In the standby mode, press MENU to display the menu.
(2) Turn the SEL/PUSH EXEC dial to select
, then press the dial.
(3) Turn the SEL/PUSH EXEC dial to select CLOCK SET, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to adjust the desired year, then press the dial.
(5) Set the month, day and hour by turning the SEL/PUSH EXEC dial and
pressing the dial.
(6) Set the minute by turning the SEL/PUSH EXEC dial and pressing the dial by
the time signal. The clock starts to move.
(7) Press MENU to make the menu settings disappear.
Resetting the date and time
1995 y 2000 T · · · · t 2079
To Next Page
Loading...
Need help?
General