49
US
Advanced operations
Notes
It may take a while before the camcorder starts
triangulating.
Use the GPS function outdoors and in open
areas, as the radio signals can best be received
in such areas.
The map always displays the north at the top.
Obtaining a map of
the current location
(triangulating priority
mode)
This feature is useful for checking a map of
your current location while traveling.
As the camcorder turns other functions
off to search for satellites, obtaining
triangulating information can take priority.
Select [Setup]
[
General Settings] [Your
Location].
Notes
If you select a certain point on the screen, the
map shows an area with that point at the center.
Select
to move your current location back
to the center again.
If the camcorder cannot acquire current
location information, the triangulating
information screen appears (p. 49).
If the location information that was previously
acquired is invalid, the marker does not appear.
To close the current location screen, select
.
Checking the
triangulating status
The camcorder displays the status of the
GPS signal reception when you are unable
to obtain the triangulating information.
1
Display your current location
(p. 49).
If your current location appears on
the LCD screen, you do not need to
continue this operation.
2
Select .
To close the triangulating information
screen, select
.
A marker (red) that indicates
your current location
Displays the triangulating
inform
ation (p. 49)
Satellite map
Triangulating
gauge
Information for the
location that was
previously obtained.
Satellite icons
To Next Page
Loading...
Need help?
General