HBD-TZ215/TZ715
12
2-8. DVD MECHANISM DECK (CDM85MB-DVBU102)
Note 1: Before disconnecting the wire (fl at type) (24 core) of optical pick-up block, solder the short-land.
5
Solder the short-land.
Note 2: When assembling the optical
pick-up block, remove the solder
of short-land after connecting the
wire (flat type) (24 core).
3 three screws
(BV3 (3-CR))
7 DVD mechanism deck
(CDM85MB-DVBU102)
DVD mechanism deck
(CDM85MB-DVBU102)
MAIN board
6 wire (flat type) (24 core)
(CN1101)
4
2 connector
(CN1501)
1 wire (flat type) (5 core)
(CN1502)
:LUHVHWWLQJ
rear side