82
DIAGNOSIS Menu
<PING>
N17
PORT LAN-COM, LAN1, LAN2 Selects the PING transmission destination port.
LAN1 and LAN2 are available only when
HKCU-SFP50 is installed.
IP ADDRESS 0.0.0.0
to 255.255.255.255 Sets the IP address of the PING transmit destination.
PING PING transmission. (Execute using EXEC)
STATISTICS Displays the PING execution result.
TRANSMITTED
PACKETS
0
to 5 Number of transmitted packets.
RECEIVED
PACKETS
0
to 5 Number of received packets.
PACKET LOSS 0
to 100 % Packet loss rate.
ROUND-TRIP
MIN
0.0
to 1000000.0 ms Minimum round-trip delay time.
ROUND-TRIP
AVERAGE
0.0
to 1000000.0 ms Average round-trip delay time.
ROUND-TRIP
MAX
0.0
to 1000000.0 ms Maximum round-trip delay time.
DIAGNOSIS
Page name
Page No.
Item Display Description
<BOARD STATUS>
D01
VIF OK, POWER ERROR, PLD
ERROR, TEMP WARNING
VIF board self-diagnostics result
TX OK, POWER ERROR, PLD
ERROR, TEMP WARNING
TX board self-diagnostics result
NET OK, POWER ERROR, PLD
ERROR, TEMP WARNING
HKCU-SFP50 board (option) self-diagnostics result
POWER ON HOUR
METER
99999 H Accumulated power-on time from power on.
HOUR METER 99999 H Accumulated power-on time
<SERIAL NUMBER>
D02
MODEL NAME Unit model name
SERIAL NUMBER Serial number
<VERSION>
D03
APPLICATION Unit software version
OS Unit software version
UPDATER Unit software version
SY ROM version of SY PLD (SY board)
VIF ROM version of VIF PLD (VIF board)
TX1(HIGH) ROM version of TX1 PLD (HIGH) (HKCU-FB50
board option)
TX1(ULTRA) ROM version of TX1 PLD (ULTRA) (HKCU-FB50
board option)
TX2 ROM version of TX2 PLD (HKCU-FB50 board
option)
NET1 ROM version of NET1 PLD (HKCU-SFP50 board
option)
NET2 ROM version of NET2 PLD (HKCU-SFP50 board
option)
<CAMERA DIAGNOSIS>
D04
NAME Model name of connected camera
ROM VERSION X.XX ROM version of camera
NETWORK
Page name
Page No.
Item Set value Description
To Next Page
Loading...
Need help?
General
