Sony HDCU5000 User Manual

86
HDCU5500
UHD SDI C, D, G, H 12G/6G/3G/HD SDI I/O
BNC type (2)
12G SDI: SMPTE ST2082, 0.8 Vp-p,
75 ohms, 11.88 Gbps/11.868 Gbps
6G SDI: SMPTE ST2081, 0.8 Vp-p,
75 ohms, 5.940 Gbps/5.934 Gbps
3G SDI: SMPTE ST424/425 Level-A/B,
0.8 Vp-p, 75 ohms, 2.970 Gbps/
2.967 Gbps
HD SDI: SMPTE ST292, 0.8 Vp-p,
75 ohms, 1.485 Gbps/1.4835 Gbps
Supplied accessories
Number plates (1 set)
Before Using This Unit (1)
Operating Instructions (CD-ROM) (1)
Optional accessories
HKCU-SDI50 12G-SDI Extension Kit
HKCU-SFP50 ST 2110 Interface Kit
HKCU-SM50 Single Mode Fiber Connector Kit
HZCU-CNFG50 Config Control Software
HZCU-SNMP50 SNMP Agent Software
HZCU-UHD35 4K/HDR Processor Software
United States and Canada: Power cord set (1-551-812-XX)
Other areas: Power cord set (1-782-929-XX)
United States and Canada: Plug holder B (2-990-242-01)
Other areas: Plug holder C (3-613-640-01)
CCA-5-3 Connection Cable (3 meters), CCA-5-10 Connection
Cable (10 meters)
Service Manual
Related devices
HDC5000/5500 Color Camera
HDC2000 HD Color Camera
HDC2580/2500/2400/1700 HD Color Camera
RCP-3000/1000 series Remote Control Panel
MSU-1000 series Master Setup Unit
General
Power requirements 100 V to 240 V AC, 50/60 Hz
Current consumption 4.5 A (max.)
Operating
temperature
–10 °C to +40 °C (14 °F to 104 °F)
Storage temperature –20 °C to +60 °C (–4 °F to +140 °F)
Mass Approx. 6.4 kg (14 lb 1.8 oz)
External dimensions (Unit: mm (inches))
Input/output connectors
CAMERA FIBER Optical fiber connector (1)
INTERCOM/TALLY/
IO PORT
D-Sub 50-pin connector (1)
• INTERCOM (PROD/ENG), 4W: 0 dBu,
RTS: 0 dBu, CC: –14 dBu
• PGM, 3 systems, 0 dBu/–20 dBu
• TALLY (R, G, Y)
•FLAG
RCP/CNU 8-pin multi-connector (1)
TRUNK 12-pin (1)
LAN COM 8-pin (1)
NETWORK TRUNK 8-pin (1)
SDI I/O 1 to 4 3G/HD/SD SDI I/O
BNC type (4)
3G SDI: SMPTE ST424/425 Level-A/B,
0.8 Vp-p, 75 ohms, 2.970 Gbps/
2.967 Gbps
HD SDI: SMPTE ST292, 0.8 Vp-p,
75 ohms, 1.485 Gbps/1.4835 Gbps
SD SDI: SMPTE 259M, 0.8 Vp-p, 75 ohms,
270 Mbps
3G SDI/HD SDI/SD SDI, character signal
selectable
REFERENCE IN/OUT BNC type (2), loop-through output
HD: SMPTE ST274, tri-level sync signal,
0.6 Vp-p, 75 ohms
SD: Black burst (NTSC: 0.286 Vp-p,
75 ohms/PAL: 0.3 Vp-p, 75 ohms) or
NTSC 10F-BB
27
(1
1
/
8
)
10 (
13
/
32
)5 (
7
/
32
)200 (7
7
/
8
)
410 (16
1
/
4
)
22
(
7
/
8
)
127 (5)

Sony HDCU5000 Specifications

General

Brand	Sony
Model	HDCU5000
Category	Control Unit
Language	English