13
Getting started
US
Unlock the stopper of the microphone holder and open the cover.
Align the convex part of the microphone with the concave part of the
holder, then place the microphone into the holder. Close the cover and lock
the stopper securely.
Be sure to align the mark on the microphone with the mark on the holder.
Connect the microphone cable to the MIC (PLUG IN POWER) jack.
Attaching the lens hood
Align the part marks , on the lens hood to those on the camcorder,
and attach the lens hood.
Turn the lens hood holder clockwise to lock the lens hood.
The fixing lever
To Next Page
Loading...
Need help?
General
