93
Customizing your camcorder
US
x.v.Color-compliant TV.
If the movie recorded with this function [ON] is
played back on a non-x.v.Color-compliant TV,
the color may not be reproduced correctly.
[
X.V.COLOR] cannot be set to [ON]:
When recording standard definition image
quality (STD) movies
While recording a movie
WIDE SELECT
When recording standard definition image
quality (STD) movies, you can select the
horizontal to vertical ratio according to the
TV connected. Refer also to the instruction
manuals supplied with your TV.
16:9 WIDE
Records movies to the full screen on a 16:9
(wide) TV screen.
4:3 ( )
Records movies to the full screen on a 4:3
TV screen.
Notes
Set [TV TYPE] correctly according to the TV
co
nnected for playback (p. 100).
PHOTO SETTINGS
(Items for recording photos)
See “Using menus” (p. 79) on the operation.
The default settings are marked with .
SELF-TIMER
Press PHOTO to start the count down. A
photo is recorded after about 10 seconds.
OFF
Cancels the self-timer.
ON ( )
Starts the self-timer recording. To cancel the
recording, touch [RESET].
Tips
You can also operate by pressing PHOTO on
t
he Wireless Remote Commander (p. 133).
IMAGE SIZE
You can select a photo size to be shot.
12.0M ( )
Records photos in the highest quality (4,000
× 3,000).
9.0M ( )
Records photos in the high quality in the 16:9
(wide) ratio (4,000 × 2,250).
6.2M ( )
Records photos clearly (2,880 × 2,160).
1.9M ( )
Allows you to record more photos in
relatively clear quality (1,600 × 1,200).
VGA(0.3M) ( )
Allows the maximum number of photos to be
recorded (640 × 480).
Notes
The selected image size is effective when the
(Photo) lamp is lit.
See page 115 for the number of recordable
photos.
To Next Page
Loading...
Need help?
General
