15
Getting started
US
Step 2: Charging the battery pack
You can charge the “InfoLITHIUM” battery pack (V series) after attaching it to your
camcorder.
Notes
You cannot attach any “InfoLITHIUM” battery pack other than the V series to your camcorder.
1
Turn off your camcorder by closing the LCD screen after replacing the
viewfinder.
2
Attach the battery pack by sliding it in the direction of the arrow until it
clicks.
3
Connect the AC Adaptor and the power cord (mains lead) to your
camcorder and the wall outlet (wall socket).
Align the mark on the DC plug with that on the DC IN jack.
Battery pack
AC
Adaptor
/CHG (flash/charge)
lamp
To the wall outlet (wall socket)
Power cord (Mains lead)
DC IN jack
DC plug
To Next Page
Loading...
Need help?
General
