1-7-5. Synchronization Circuit
The MCS-8M controls entire control system with a single-chip CPU (IC10). This circuit has a 2-Mbyte boot flash
memory (IC1201) for booting, a 64-Mbyte flash memory (IC1200) for storing application programs, and a 128-Mbyte
work SDRAM (IC200 to IC203).
The reference output circuit outputs the BB signal using the encoder device (IC4202) for composite output. This circuit
can output a reference signal more advanced than the input reference signal by the timing signal output from the Video
Mix FPGA (IC5003) in the video processing block.
MCS-8M
1-38
To Next Page
Loading...
Need help?
General
