Section 1
Service Overview
1-1. Installation
1-1-1. Installation Environment
Operating temperature
+5 to +40 ℃
Performance temperature
+10 to +35 ℃
Operating humidity
10 to 90 % (relative)
Storage temperature
-20 to +60 ℃
Mass
Approx. 5.0kg
Prohibited locations for installation
• Areas where the unit will be exposed to direct sunlight or intense light
• Dusty areas
• Areas subject to vibration
• Areas in a strong electric or magnetic field
• Areas near heat sources
• Areas subject to electrical noise
• Areas subject to static electricity
Ventilation of the unit
This unit is cooled by fans installed on the right side. The power supply will be damaged if the vents on both sides are
blocked or the fan does not work.
Keep 100 mm or more space from each side of the unit.
1-1-2. Power Supply
Power Supply Specifications
A switching regulator is used in the power supply of the unit. An input voltage within the range of 100 to 240 VAC can
be used without switching the power supply voltage.
Power voltage
100 to 240 VAC
50/60 Hz
Current consumption
0.7 to 0.3 A
Recommended Power Cord
This unit does not come with a power cord. To get a power cord, please contact your local Sony Sales Office/Service
Center.
WARNING
• Use the approved Power Cord (3-core mains lead)/Appliance Connector/Plug with earthing-contacts
that conforms to the safety regulations of each country if applicable.
MCS-8M
1-1
To Next Page
Loading...
Need help?
General
