MEX-GS810BH/N6000BH
MEX-GS810BH/N6000BH
2323
SECTION 4
TEST MODE
SETTING THE TEST MODE
Setting method:
1. In the state of source off (the clock is displayed on the liquid
crystal display), enter the test mode by pressing the buttons in
order of the [
4] t [MIC 5] t [
V
ALBUM 1] (press only
the [
V
ALBUM 1] button for two seconds).
2. It is set to the test mode, and all segments of the liquid crystal
display light.
Releasing method:
Press the [ OFF SRC] button for 1 second.
MICROPHONE AUDIO LOOPBACK
To confi rm the state of the external microphone used when a
handsfree function is used, the microphone audio is output from
the speaker.
The breakdown judgment of the microphone can be done without
connecting H/F with the cellular phone.
Procedure:
1. Enter the test mode.
2. Press the [ OFF SRC] button to select the Bluetooth Phone
function.
3. On/off of the microphone audio loopback function changes
whenever the [ALBUM
v
2] button is pressed (“ ” is dis-
played on the liquid crystal display).
LOOPBACK
ON Lit
OFF None
To Next Page
Loading...
Need help?
General
