Sony NSX-40GT1 User Manual

Note
[HDMI 1] - [HDMI 4], [Video/Component], and devices equipped with the Control for HDMI
function cannot be set to [Make default TV device].
To remove the device
Select the device you want to remove from the list of configured devices, then select [Disconnect
device]. The built-in tuner and DISH Network enhanced DVR integration devices are shown in the
list of available sources when removed.
Return to Top
HDMI settings
You can control devices equipped with the Control for HDMI function with the Keypad. Confirm
that the devices are connected properly to the TV with HDMI connections.
Press Fn + 1 and select [Video input] - [HDMI settings].
Return to Top
Built-in tuner settings
Press Fn + 1 and select [Video input] - [Built-in tuner settings].
Control for HDMI: Select [On] to link operations of the TV and the
connected devices equipped with the Control for
HDMI function.
Device auto power off: Select [On] to turn off devices equipped with the
Control for HDMI function when the TV is turned
off.
TV auto power on: Select [On] to turn on the TV when devices
equipped with the Control for HDMI function are
turned on.
Device list: Select [Enable] to turn on the Control for HDMI
function for the devices shown on the list.
Channels: Cable/Antenna: Select the input source of the
signal.
Auto program: Automatically scans and sets all
available channels based on the Cable/Antenna
setting. Current channels will be cleared and new
available channels will be set.
Add digital channels: Adds available digital
channels based on the Cable/Antenna setting.
Current channels are not cleared.
Program information source: Select [Rovi
Guide] to view program data from it.
Analog fine tune: Select [Custom] to fine-tune a
channel manually, use the left and right keys to
fine-tune it.
Signal diagnostics: You can view diagnostic information for the
current signal. To view diagnostic information
such as Frequency (kHz) and Status, select a
channel currently being received via
NSX-24GT1/NSX-32GT1/NSX-40GT1/NSX-46GT1
67

Sony NSX-40GT1 Specifications

Power

power requirements voltage	AC 120V
power requirements frequency	60Hz
power consumption in operation	122 W
power consumption in standby	0.5 W
power consumption in download acquisition mode	34 Wh/day

Display

aspect ratio	16:9
backlight type	Edge LED
display device	LCD
display resolution	1920 x 1080p (Full HD)
screen size	40 inches
viewing angle right/left	178(89/89)
viewing angle up/down	178(89/89)

Audio

audio power output	20W (10W x 2)
audio dac	48kHz/24bit
speakers total	2

Inputs and Outputs

ac power	1 (Rear)
composite video input	1 (Rear)
component video input	1 (Rear)
hdmi connections input	4 (2 Rear/ 2 Side)
analog audio input	1 (Rear)
analog audio output	1 (Headphone)
digital audio optical output	1 (Rear)
usb 2.0	4 (Side)
ethernet connections	10BASE-T/100BASE-TX/1000BASE-T (Rear)

Weight and Dimensions

dimensions without pedestal	37 5/8 x 23 1/8 x 2 1/8 inches
dimensions with pedestal	37 5/8 x 24 3/8 x 11 3/4 inches
packaging dimensions	41 1/8 x 27 x 6 3/4 inches
weight without pedestal	37.7 lbs
weight with pedestal	41.5 lbs