Sony SRS-M30 User Manual

15
Repeat and shuffle Play
1 During playback, press (3) (REP) or
(4) (SHUF) repeatedly until the
desired setting appears.
To return to normal play mode, select “REP
OFF” or “SHUF OFF.”
Note
(ALBM) +/– will not work during shuffle play.
Scan
You can quickly locate a specific point on the
iPod.
1 During playback, press (5) until
“SCAN ON” appears.
The first 10 seconds of each track will be
played.
To return to normal play mode, select “SCAN
OFF.”
Note
This function will not work during shuffle play.
Other functions
Changing the sound settings
Adjusting the sound
characteristics
1 Press the select button repeatedly
until the desired item appears.
2 Rotate the volume control dial to
adjust the selected item.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
The following items can be set (follow the page
reference for details):
“
z” indicates the default settings.
Select To play
REP TRK track repeatedly.
REP ALB album repeatedly.
REP ART artist repeatedly.
REP PLY playlist repeatedly.
SHUF ALB album in random order.
SHUF ART artist in random order.
SHUF PLY playlist in random order.
SHUF ALL all tracks in random order.
EQ3
To select an equalizer type: “XPLOD” (
z),
“VOCAL,” “EDGE,” “CRUISE,” “SPACE,”
“GRAVITY,” “CUSTOM” or “OFF.”
DSO
To select the DSO mode: “1,” “2” (
z), “3” or
“OFF.” The larger the number, the more
enhanced the effect.
When tuner/PD*
1
is selected as the source, the
default setting is “OFF.”
LOW*
2
, MID*
2
, HI*
2
(page 16)
To customize the equalizer curve.
BAL (Balance)
To adjust the balance between the right and left
speakers: “RIGHT-10” – “CENTER” (
z) –
“LEFT-10”
FAD (Fader)
To adjust the balance between the front and rear
speakers: “FRONT-10” – “CENTER” (
z) –
“REAR-10”
SUB*
3
(Subwoofer volume)
To adjust the subwoofer volume: “+10 dB” –
“0 dB” (
z) – “–10 dB”
(“ATT” is displayed at the lowest setting.)
AUX*
4
(AUX level)
To adjust the volume level for each connected
auxiliary equipment. This setting negates the
need to adjust the volume level between sources
(page 17).
Adjustable level: “+18 dB” – “0 dB” (
z) –
“–8 dB”
*1 CDX-M50IP/MR50IP only
*2 When EQ3 is activated.
*3 When the audio output is set to “SUB” (page 16).
*4 When AUX source is activated.

Sony SRS-M30 Specifications

General

Magnet type	Neodymium
Audio output channels	2.0 channels
Speakers	Active
Output power	2 W
Dimensions (WxDxH)	59 x 45 x 105 mm
Magnetically shielded	Yes
Impedance	8 Ω
Frequency range	250 - 20000 Hz
Product color	Silver
Number of batteries supported	3
Connector(s)	Straight stereo-mini

Weight and Dimensions

Depth	34 mm
Width	59 mm
Height	105 mm
Weight	200 g
Diameter	39 mm
Cord length	0.75 m